Shijie CamoNet Pro 420D
Robust single-face netting for high-strength outdoor screening
Shijie CamoNet Pro 420D Overview
Built around a clearly defined fabric-and-mesh construction, the Shijie CamoNet Pro 420D is a 420D camouflage net made for industrial material screening, slope cover, outdoor shade, field decoration and customised equipment enclosures. Rather than relying on colour alone, the net combines surface irregularity, controlled openness and secure attachment points.
Choose this model when robust single-face netting for high-strength outdoor screening. Production can be aligned with panel dimensions, terrain palette, connection method and packing needs before order confirmation.
Features
• A heavier die-cut 420d face combined with a reinforced 10 cm backing grid
• Material: 100% 420D polyester filament, 130 ± 10 g/m², 0.19–0.22 mm thick
• Supporting structure: 24-strand nylon rope; 10 × 10 cm grid; approximately 12 g/m²
• Operating range: -30°C to +50°C
• Custom dimensions, shapes, colours and packing
• Individually packed panels for controlled site handling
Technical Specifications
| Item | Specification |
|---|---|
| Product name | 420D Camouflage Net |
| Series | Optical Camouflage and Sunshade Net |
| Model | Shijie CamoNet Pro 420D |
| Surface fabric | 100% polyester filament |
| Fabric weight | 130 ± 10 g/m² |
| Fabric thickness | 0.19–0.22 mm |
| Surface process | 3D die-cut wavy camouflage pattern |
| Backing mesh material | 24-strand standard nylon rope |
| Mesh size | 10 cm × 10 cm square grid |
| Mesh weight | 12 g/m² |
| Breaking strength of individual mesh cord | ≥750 N |
| Connection method | Hand-tied |
| Edge binding | Single-layer edge binding in matching fabric |
| Tie rope spacing | One tie cord at 1 m intervals |
| Finished net weight | 140–150 g/m² |
| Warp tensile strength | ≥1200 N |
| Weft tensile strength | ≥1100 N |
| Warp tear strength | ≥50 N |
| Weft tear strength | ≥30 N |
| Visible light shading rate | ≥80% |
| Light transmittance | ≤1.2% |
| Surface finish | Matte, designed to reduce obvious specular reflection |
| Operating temperature | -30°C to +50°C |
| Outdoor service life | Typically 6–12 months, depending on UV exposure, wind, installation and maintenance |
| Shelf life under recommended indoor storage conditions | Approx. 2 years |
| Wind resistance | Suitable for Beaufort Force 5–6 winds when properly secured |
| Flame retardancy | Not standard; optional version available with self-extinguishing performance within 10 seconds after flame removal |
| Standard sizes | 2 × 2 m, 2 × 3 m, 3 × 3 m, 3 × 6 m, 4 × 6 m, 6 × 6 m and 6 × 12 m |
| Custom size range | Width 1.5–50 m; length up to 200 m, subject to production confirmation |
| Dimensional tolerance | Length and width within ±2% |
Product Construction
The Shijie CamoNet Pro 420D uses a heavier die-cut 420D face combined with a reinforced 10 cm backing grid. The surface is cut into a three-dimensional leaf-like profile to interrupt uniform outlines. Its matte finish reduces obvious glare in strong light, while edge treatment and regularly placed ties make adjoining panels easier to tension and connect.
The design is intended to combine background matching with practical deployment. Final effectiveness depends on colour selection, contour management, viewing angle, support geometry and the surrounding environment.
Standard Sizes and Project Customisation
Common rectangular sizes cover small screens through large temporary roofs. Non-standard panels can be produced from 1.5 to 50 m wide and up to 200 m long, subject to production review. Arcs, fan shapes, trapezoids, irregular polygons, curved covers and equipment wraps are available. Length and width tolerance for custom cutting is controlled within ±2%.
Outdoor Performance and Service Conditions
The stated operating range is -30°C to +50°C. Visible-light shading ≥80%; stated transmittance ≤1.2%. Typical open-air use 0.5–1 year; indoor storage approximately 2 years. These figures describe the supplied product specification; actual service life depends on UV exposure, wind loading, abrasion, installation tension and maintenance. Additional anchors and edge protection are recommended for exposed locations.
Jungle Three-Color
Dark green, grass green, and earthy yellow. Commonly used for construction sites, mountain areas, vegetation backgrounds, and outdoor green environments.
Desert Three-Color
Sand yellow, light brown, and earthy brown. Suitable for sand, gravel yards, dry land, and desert-style environments.
Solid Colors
Army green, black, white, and khaki are available for sunshade, decoration, screening, and general outdoor covering.
Pattern Options
• V pattern
• C pattern
• S pattern
Custom color matching can be discussed according to sample, background environment, or project requirements.
Individual Packaging
Each panel can be packed separately for easier handling, storage and site distribution. Five independent bag styles are available, while export cartons, bales or other bulk packing can be discussed according to panel size, quantity and shipping method. Optional reinforced ties and fixing buckles help adapt the net to non-standard support points.
One Factory - Global Reach
FAQs
What is the main construction of Shijie CamoNet Pro 420D?
It uses a heavier die-cut 420D face combined with a reinforced 10 cm backing grid. Key material details are listed in the technical table on this page.
Can size, colour and shape be customised?
Yes. Jungle three-colour, desert three-colour, army green, black, white and khaki. Dimensions, joins, tie points and packing can be adjusted after technical confirmation.
Is flame-retardant treatment standard?
No. Standard optical sunshade models are supplied without flame-retardant treatment unless specified. An optional version can be produced to self-extinguish within 10 seconds after the flame is removed. Multi-band models include the stated flame-retardant requirement.
Request a Custom Quote
Send the required size, quantity, colour or background, installation environment, expected service period and destination. For technical projects, also include the required test standard and acceptance criteria.
Binzhou, Shandong Province, China
19954341252
info@sjxincai.com
sales@sjxincai.com